energy-control ec-100

With the energy-control ec-100 system, we have the opportunity to
actively utilize the performance and storage capacity of the ground.
The geothermal probes, collectors, energy piles or whatever energy
connected to the system are balanced in real time according to their
current energy potential in real time. If an energy source has more
power available in a given period, the system will the system will
recognize and regulate these factors. Sub-distribution and therefore
a sub-area to be balanced is no longer necessary. Each energy source
can be connected directly to the overall system. In order to obtain
information about the performance of each connected circuit,
detailed monitoring is available.

Actively influence the storage medium earth
We achieve significantly higher energy efficiency with an intelligent
use of the geothermal field. A higher load on a sub-area significantly
extends the useful life of the natural cooling for the air conditioning
of the building and the transition to active cooling is delayed.
By controlling the system in this way, significant energy savings
can be achieved in heating and cooling operation.

Optimization and maintenance through the ec-100 system
We can ensure smooth operation with the control and the
associated software. This allows each circuit to be flushed
independently, vented and pressure tested. Furthermore,
an automatic refill unit can be installed in the start-up time
or for continuous operation.